1.5 kg Alabaster model plaster

1.5 kg finest white alabaster model plaster

• for modeling and structuring
• for casting moulds, figures etc.
• for stucco work
• high molding accuracy
• only applicable indoors
• contains no additives
• free of additives
• non-toxic and non-caustic
• ecologically harmless
• in an environmentally friendly paper kraft bag

Application:

• Mixing ratio:
• for modeling approx.:
  • 5kg for 2.5 - 3 L water / 1 kg for 450 - 600 ml water / 100g for 45 - 60 ml water
• for casting approx.:
  • 5kg for 3.5L water / 1kg for 700ml water / 100g for 70ml
• Sprinkle powder in pure water and let sink for 2 min. Then stir well (15 minutes processing time!).
• when modeling:
  • now process the mass
• when puoring:
  • Now pour the mass into the mold and lightly tap the mold on the work surface to loosen any air bubbles that have formed.
  • then let it dry.
  • wait 90 minutes before removing from the mold..
  • Unnecessary edges can be removed with a knife.
• The mass can be painted after it is completely dry.

Important instructions:

• keep away from children
• do not inhale or consume
• process with stainless tools
• cleaning tools after work
• Processing temperature: from +5°C
• Store dry and frost-free
• Always close the bag tightly